The Makinex Jackhammer Trolley carries most of the weight of the jackhammer while the user positions themselves behind the trolley and pushes it along. The ergonomic design minimises vibration impact on the user and provides safer jackhammer operation by reducing back strain and operator fatigue.

The Makinex Jackhammer Trolley can be adjusted to 6 different positions, ranging from 20-80 degrees to suit most demolition jobs, making using a jackhammer and your demolition job easier, faster and safer.

Suitable for 16kg (35lbs) jackhammer models: Bosch GSH16, Dewalt D25901K-XE, Hilti 1000 & 1500, Hitachi H65, Makita HM1307 & HM1317, & Milwaukee

*Jackhammer and attachments are not included and are sold separately.

The post Jackhammer Trolley (Flooring Remover) appeared first on ACME Equipment Pte Ltd.

INDEPENDENT MIXING AND PUMPING UNIT
The independent mixer and pump keeps both processes separated. This allows the mixer to operate at a consistent mixing speed, while keeping the pump’s flow rate variable without any quality fluctuation.

SELF-STABILIZING CLOSED-LOOP WATER CONTROL SYSTEM
The Multimix-3D is equipped a number of probes around its hoppers to detect if any material is in the machine. The probes prevent the machine from dry-running without any material, thus prolonging its lifespan.

MAI-PATENTED MIXING UNIT
Inside the Multimix-3d’s mixing tube is a customizable mixing unit that can be changed easily to suit any material specification.

INFORMATION DISPLAY AND INTELLIGENT CONTROL SYSTEM
A digital display is included, showing important information as well as MAI’s Intelligent Control System. It gives the user a complete control over the machine, parameters including :

• Water flow
• Water tolerance
• Delivery rate
• Vibrator adjustment
• Probe adjustment, and more

AGITATOR IN PUMP’S HOPPER
Agitator arm inside the pump’s hopper allows any concrete printing material to flow in easily, preventing clumps forming along the side of the hopper.

HIGH ENDURANCE BUILD MATERIAL AND QUALITY
The Multimix-3D is built to last. Stainless steel and hot-dip galvanized components provide corrosion protection, as well as MAI^®CODUR synthetics making components that come in contact with the material high resistance and easy to clean.

DOWNLOAD SPEC PDF

The post Multimix-3D appeared first on ACME Equipment Pte Ltd.

The MortarMaster Multitrowel brings another dimension to your surface finishing work. Adjustable into concave, convex or any curvilinear surfaces!

The Multitrowel’s design allows it to be easy to use and control. Built-in slot for Allen Key to adjust its blade curvature quickly, stainless steel blade for durability and flexibility, as well as glass reinforced plastic handle so that it stays light and long lasting.

The post Multitrowel appeared first on ACME Equipment Pte Ltd.

• Intensive mixing minimises “balling”
• Shorter mixing and discharge times
• New rectangular flat blades for precise blending 
• Few mixer arms, lower running build up
• Easier cleaning

Teka turbine pan-type Glass Batch mixers offer more mixing possibilities such as:

• Steam-injection through rotating lances, or through stationary nozzles.
• Mixer doubling as weigh-bin when mounted on load cells
• The spring-loaded mixing arms are mounted in the rotor head, and are adjustable to compensate for wear.
• This, plus their various angles of attack enhance the nix effect,reduce wear and protect the drive and shock.
• A protective cover encloses the mixers on top. A built in seal makes it near dust-proof.
• Large, hinged segments with variable positioning are possible, raised and lowered by a manual or motorized cable winch

The mixing pan floor and the outer walls are protected by exchangeable wear liners. The spring-loaded mixing arms are mounted in the rotor head and are adjustable to compensate for wear. This, plus the various angles-of-attack of the paddles enhance the mix-effect, reduce wear and protect the drive from shock

Central lubrication for the mixing arm bushings is available. Depending on the application, mixing paddles, wall scrapers, and mixing arm wear guards made of various abrasion- resistant materials are available. These include cast-iron W4, with complete tungsten-carbide surface, polyurethaneelastomere (PU), nickel-free special casting, etc.

The centrally located planetary gearbox is driven by a 3-phase TEFC motor which is fl angemounted directly to the gearbox, in the case of pan-type mixers THZ 375 to THZ 1125 turbine.

Mixer sizes THZ 1125 G to THZ 7500 are driven by a foot-mounted motor which is connected to the gear box by a universal joint cardan shaft. A hydraulic turbo coupling or frequency converter for soft starts under load are also available.

Flange to the gearbox and driven by it is a hydraulic gear pump which constantly cycles the oil. Gearbox and discharge gate(s) use the same oil for less maintenance. This oil also supplies the pressure to operate the discharge gate(s).

The discharge gate assembly, used to remove the batch from the mixer, is a complete heavy-duty component bolted to the mixer pan floor. The semi-circular gate is hydraulically operated by means of a rotating piston cylinder.

It is electrically controlled, and can be opened to any degree desired. The discharge gate is protected by a specially designed dust-free discharge protection. Locating the pivot-point of the gate slightly inside the pan circumference allows for a large opening and thereby, a fast discharge. In case of emergency, a manual hand pump for the discharge door is standard. As an option, the discharge gate can be opened independent of the mixer main drive, via a separate hydraulic power-unit

Mixers THZ 250 to THZ 1125 may be equipped with up to 4 gates, whereas 3 gates is the maximum for THZ 1125 G to THZ 7500. Sampling gates are also available.

Download Spec PDF

The post Pan-Type THZ – Glass Batch Preparation Mixers appeared first on ACME Equipment Pte Ltd.

PC strand consists of wires spun together in the same direction and with the same lay length. The strand product contains 2-wire, 3-wire and 7-wire strands. Low relaxation PC strand can be used for either prestressing or post-tensioning of concrete.

Feature: Low relaxation, High Tensile Strength

1) Construction: 2, 3, 7 wire

2) Standards: GB/T5224-2003, BS5896-1980, EN10138-2005, AS NZS 4672.1-2007, ASTM 416-2006, ISO_6934-4-2000, JIS G 3536-1999, etc…

3) Packaging:

Inner Diameter: 760mm

Outside Diameter:1400mm Max

Coil’s width: 760mm

Coil’s Weight: 2500~3500 kg

We use vapors corrosion inhibiting technology on export anti-rust packing. Out side of the coil has 3 wraps. There are two wooden pallets on the bottom of the coil. The coil is eye to sky in the container.

4) Inquiry please provide: Diameter, Number of wire, Tensile Strength,, Quantity and Standard.

5) Month productivity for Strand: 10 000 tons.

6) 20’ container: 20,000~25,000 kg.

7) Raw material: We have stable wire rod suppliers such as Shougang Group, Xingtai Iron company, Tianjin Iron company. There are thousand of wire rod in our warehouse to ensure production.

The post PC Strands appeared first on ACME Equipment Pte Ltd.