Mortar Master VSE 500
Ideal choice for the mixing and conveying of materials, even dry types which cannot be pumped by discharged pumps. The VSE500 has proven itself to be the most time and cost saving machinery that replaces crane transport and reduce manpower in the handling of:
- Floor Screed
- Chipping concrete
- Sand (wet/dry)
|Electrical Motor(kW): 18.5||Dimension: (LxWxH) 2600 x 1300 x 1250|
|Conveying Distance(m): 200*||Maximum Grain Size: (mm) 10*|
|Conveying Height (m): 150*||Weight(kg) 1125|
|Compressor Volume (Req.): 185-375||Conveying capacity: (m3/hour) 8*|
|Compressor Pressure (Bar): 7|
Ideal when access to work site is difficult:
The VSE 500 is most suitable for mixing and pumping materials to difficult to reach locations. Reduces workers load and time needed for material transportation. The VSE 500 can help to increase job site efficiency by more than 100%.
Best of Both Worlds: Mix & Pump
Built in mixer ensures well mixing of the materials before pneumatically pumping the materials to its intended destination.
How It Works:
1|Operators input required materials into the VSE500. Single shift shaft mixer gives material a good mix -vertical
2|The mixed materials can be delivered through the conveying line to its intended destination or horizontal.
3|The materials will be conveyed to the desired designation without any hassle.
|Pressure vessel volume||500 liters|
|Technical output||10 m3 /h|
|Grain size||max. 10mm|
|Transport distance||horizontally 200 m; vertically 150 m|
|Electric motor power||18 kW|
|Working overpressure into wessel||0,8 MPa|
|Voltage system||AC Three Phase 400V, 50Hz|
Air Source Requirements:
|Technical output||360 m3/h|
|Nominal overpressure||0,8 MPa (8 bar)|
**Technical Specification Subject to changes without prior notice.