Sand/Screed Pump and Plastering Machine

Free!

MM

Providing an innovative Solution to handle sand and mortar mixes which cannot be handled by discharged pumps The MortarMaster series provides conveniences in mixing and pumping equipment to projects.

Product Description

MortarMaster VSE 500

MortarMaster VSE 500

MotarMaster VSE 500Ideal choice for the mixing and conveying of materials, even dry types which cannot be pumped by discharged pumps. The VSE500 has proven itself to be the most time and cost saving machinery that replaces crane transport and reduce manpower in the handling of:

  • Floor Screed
  • Chipping concrete
  • Sand (wet/dry)

vse1  vse2  vse3

Technical Data:

VSE 500
Electrical Motor(kW):                   18.5 Dimension: (LxWxH)  2600 x 1300 x 1250
Conveying Distance(m):              200*
Conveying Height (m):                 150* Weight(kg)                     1125
Compressor Volume (Req.):        185-375 Conveying capacity: (m3/hour)      8*
Compressor Pressure (Bar):        7 Maximum Grain Size: (mm)             10*

Ideal when access to work site is difficult:

The VSE 500 is most suitable for mixing and pumping materials to difficult to reach locations. Reduces workers load and time needed for material transportation. The VSE 500 can help to increase job site efficiency by more than 100%.

Best of Both Worlds: Mix & Pump

Built in mixer ensures well mixing of the materials before pneumatically pumping the materials to its intended destination.

vse4
How It Works:

123 

1|Operators input required materials into the VSE500. Single shift shaft mixer gives material a good mix -vertical
2|The mixed materials can be delivered through the conveying line to its intended destination or horizontal.
3|The materials will be conveyed to the desired designation without any hassle.

1

1|Operators input required materials into the VSE500. Single shift shaft mixer gives material a good mix -vertical

2

2|The mixed materials can be delivered through the conveying line to its intended destination or horizontal.

3

3|The materials will be conveyed to the desired designation without any hassle. 

 

Basic technical data:

Pressure vessel volume 500 liters
Technical output 10 m/h
Grain size max. 32mm
Transport distance horizontally 100 m; vertically 40 m
Electric motor power 18 kW
Working overpressure into wessel 0,8 MPa
Voltage system AC Three Phase 400V, 50Hz

Dimensions :

Length 3680mm
Width 1300mm
Height 1300mm
Weight 1125mm

Air Source Requirements:

Technical output 360 m3/h
Nominal overpressure 0,8 MPa (8 bar)

**Technical Specification Subject to changes without prior notice.

MortarMaster MN250

High mixing performance, excellent homogeneity of mixture and high productivity are the primary features of the MN 250 forced-agitation mixer.
A large-capacity mixing drum has a wear-resistant lining and agitation blades which can easily prepare fresh mortar, fine concrete mixes, fire-proofing spray mixes, high-temperature concretes, glues, or dry powder materials, while they can also easily agitate, even over a long time, hard-to-agitate mixtures applied in the metallurgy and highly abrasive mixtures.

Technical specification Dimensions
Pan capacity 300 l Length 1300 mm
Usable capacity 250 l Width 1100 mm
Output 4 m3/h Height 1300 mm
Grain 32 mm Weight 610 kg

MortarMaster MN151

Where the common method of mixing is not sufficient and perfect agitation of a mix is required, one simple solution is available: the MN 151 forced-agitation mixer. It easily copes with the preparation of fresh mortars, fine concrete mixes, fire-proofing spray mixes, screeds, high-temperature concretes, as well as the preparation of dry powder mixes. It is beneficial for anyone who seeks high productivity combined with perfect agitation, whether in minor maintenance works or special works. This little “miracle” does not rely on “voluntary gravitational” agitation, but uses a sophisticated agitation system of small moving blades, which guarantees the preparation of an absolutely homogeneous mix in an exceptionally short time.

Technical specification   Dimensions
Pan capacity 150 l Lenght 900 mm
Usable capacity 120 l Width 800 mm
Output 1,8 m3/h Height 1200 mm
Grain 16 mm Weight 150 kg
E-motor 2,2 kW

MortarMaster MN350

High mixing performance, excellent homogeneity of mixture and high productivity are the primary features of the MN 350 forced-agitation mixer.
A large-capacity mixing drum has a wear-resistant lining and agitation blades which can easily prepare fresh mortar, fine concrete mixes, fire-proofing spray mixes, high-temperature concretes, glues, or dry powder materials, while they can also easily agitate, even over a long time, hard-to-agitate mixtures applied in the metallurgy and highly abrasive mixtures.

Technical specification   Dimensions
Pan capacity 400 dm3 Lenght  1550 mm
Usable capacity 350 dm3 Width  1310 mm
Output 5,6 m3/h Height  1600 mm
Grain  32 mm Weight  924 kg
E-motor 11 kW
Electrical system TN-S 3P+N+PE -50 Hz, 400 V
Operating voltage 400 V, 50 Hz
Input power 22 A
Mixing time 60 sek
Time of emptying 60 sek
Speed of spindle 31 ot/min   +/-  7%

MortarMaster Plastering Pump

CM150i

Electrically powered high quality screw pump, best suited for plastering, fireproofing application, wall screeding, etc. The application of the CM150i is endless. A definitely must-have in the work site for productivity.

Synergy of the latest developments in design, operational safety, construction technology and designer’s creativity has yielded the plastering machine CM 150i as another member of the successful family of machines made by Strojstav. A reasonably rated hopper, a screw pump with extended lifetime and a drive with a continual speed change feature make this machine suitable for pumping applications involving any type of plaster, mortar or special mixes. With the use of a high-performance compressor and pneumatic or electric remote control, plastering work, with the CM 150i machine is a very comfortable activity. It is just the wide range of possible applications, low operating costs and high reliability that assure virtually immediate cost return of the CM 150i.

Technical specification Dimensions
Hopper capacity 150 l Length 2300 mm
Performance 6 – 40 l/min Width 765 mm
Delivery distance max. 40 m Height 650 mm
Drive invariable Weight 180 kg
variable (mechanical variator)
E-motor 4 kW

SMZ120/G

Assurance of perfect processing of dry plaster mixers, with a reliable sysem consisting of feed wheel, continual precise water dosing, screw pump and compressor that guarantee stable quality of plaster mix application.

Perfect processing of dry plaster mixes with a gypsum, lime and cement base is assured by the plastering machine SMZ 120/G. A reliable system of mix delivery by means of a feed wheel, continual precise water dosing, a proven screwpump and an adequately rated compressor all guarantee stable quality of a plaster mix applied to a certain spot. In addition to the standard use of pre-packed mix bags, the machine can be also fitted with an automatic feeder for the continuous supply of mixture from the machine’s material bin to the hopper. The variability of pumps usable with the SMZ 120/G provides for optimum processing of any type of plaster pre-mixes with this machine.

Technical specification Dimensions
Hopper capacity 100 l Lenght 1540 mm
Grain 0 až 4 mm Width 731 mm
Delivery continual Height 965 mm
Output 20 l/min Weight 268 kg

 

Click here to see more of MortarMaster Projects

MotarMaster Projects

Contact Us